|
 |
|
|
PLS laser tools 
were developed to give
contractors the ability to
transfer critical layout
reference line and points
for any job site task. All PLS
laser tools are self-leveling,
compact and durable laser
alignment tools. |
| |
|
|
|
Every
contractor has basic alignment tasks to perform on the job site.
No project can be completed without layout of the work, installation
of
material and quality control. Each of these functions is accomplished
by
determining plumb, level and square reference. Nothing can be
built
without them. The plumb bob and water level are ancient tools
used to
establish vertical or horizontal reference. Reference lines
or planes require
opposing reference points. A plumb bob takes the efforts of
two people;
one person holds the string while the other waits below for
the plumb bob
to stop swinging (in the wind, if they’re outdoors). This
can be an
expensive exercise at $45.00 per hour, per person. PLS lasers
provide
bright, crisp reference points and lines, for quick and accurate
layout.
Today contractors have a choice of bubble vial levels, rotary
levels and hybrid laser products. Which tool gives the highest
return on
your investment? A contractor who spends 90% of the workday
installing
acoustic ceilings requires a constant horizontal laser line
for T-bar and wire
installation. The PLS360 is ideal for acoustical contractors.
However, for
a contractor who performs multiple alignment tasks including
plumb and
square, no laser tool in the world is a better value than the
PLS5, PLS3,
PLS180 or the PLS90. |
|
 ............. |
|
Built
by contractors for contractors, PLS tools were developed out
of
necessity by professional carpenters with over 50 years of experience
in
commercial and residential interior and exterior layout. PLS
founders
were contractors first before becoming manufacturers of the
finest
point-to-point and reference line lay out tools in the world.
Point-to-point reference means you can plumb with a PLS5 or
PLS3 from
floor to ceiling or from 50 feet off the ground. With our unique
PLS 90
laying out square can be done faster than ever before; No more
3-4-5.
Use a PLS laser to check existing conditions before work begins.
Verify
the accuracy of subcontractors’ work in minutes. Our PLS180
and PLS360
provide contractors with bright, accurate and reliable lines
of reference
for level or plumb line reference. Use
the PLS180, PLS360 or PLS90 for
outdoor layout in bright sunlight. |
|
| |
|
|
 ............... |
|
PLS
laser tools are ideal for installing curtain walls, foundations,
columns,
skylights,doors, cabinetry and much more. The portability and
utility of
PLS lasers make them attractive alignment tools when bubble
vial levels or
rotary lasers are too cumbersome or too limited to do the job.
However
when a rotary laser is required, our PLS HVR 1000 and PLS HVR
500 are
designed to provide the maximum utility and value at attractive
prices.
The amount of alignment information available from these tools
makes
them useful to a number of trades in the building industry.
All PLS tools are designed and manufactured under strict quality
control
guidelines. Distribution of PLS laser tools is limited to professional
building
materials dealers and other laser tool specialists across the
country.
PLS tools are fully repairable at our factory or at factory-trained
service
centers across the U.S.A. See our service center web page. |
|
| |
|
|
|
|
